Back to Blog
How-to Guides 2026-11-20 Alberto Guardiani® | Scarpe Uomo e Donna 0 views

How to Clean Aeris Logo Sneakers Without Damage

How to Clean Aeris Logo Sneakers Without Damage

Learn how to safely clean your Aeris Logo sneakers using gentle methods that protect the leather upper and logo details.

What the Aeris Logo record confirms about care

The Aeris Logo sneaker has a coated leather upper, a polyester fabric lining, and an EVA and rubber sole. The catalog states that the coated leather gives a clean, refined appearance. That coating also makes the upper more resistant to stains and easier to wipe clean than untreated leather.

Because the sneaker uses a coated leather, you can clean it with a damp cloth and mild soap. Avoid harsh detergents, bleach, or soaking the upper. The lining and insole are not removable in the supplied record, so let the sneaker air dry after cleaning rather than using heat.

Aeris Logo sneaker details

  • Aeris: Upper: coated leather. Lining: polyester fabric. Sole: EVA and rubber. Coated leather is less porous than natural leather, so it resists dirt and cleans with a simple wipe. The polyester lining breathes but can retain moisture if soaked.
    Aeris
    Aeris
  • Aeris: Sole is EVA and rubber for lightweight cushioning and grip. EVA is porous. Scrubbing the sole with a stiff brush can remove dirt, but avoid getting the upper wet from sole cleaning.

Safe cleaning steps for Aeris Logo sneakers

These steps use only household items and respect the sneaker's materials. The catalog does not list specific cleaning instructions, so the routine below follows general coated-leather care.

  1. Remove loose dirt: Use a soft brush or dry cloth to dust off the upper, sole, and logo area. This prevents rubbing grit into the coating.
  2. Prepare a mild cleaning solution: Mix a few drops of mild dish soap with lukewarm water. Do not use bleach, alcohol, or acetone, which can strip the coated leather finish.
  3. Wipe the upper: Dampen a soft microfiber cloth with the solution and wring it well. Wipe the coated leather and logo gently. Avoid saturating the lining or insole.
  4. Clean the sole separately: Use a separate cloth or soft brush with soapy water on the EVA and rubber sole. Rinse with a damp cloth and wipe dry. Keep sole water off the upper.
  5. Air dry away from heat: Let the sneakers dry at room temperature. Do not use a radiator, hair dryer, or direct sunlight. The polyester lining and insole need slow drying to avoid odor.

What to avoid with coated leather logos

The logo is part of the coated leather upper. Scrubbing the logo area with a brush or using solvent-based cleaners can peel or dull the coating. If the logo has any raised or printed detail, wipe it gently with a damp cloth and pat dry.

The catalog does not confirm whether the logo is embossed, printed, or applied. Treat it as a delicate surface until you know. If a stain on the logo does not come off with a light wipe, stop and consult a professional cleaner who works with coated leather.

Related Articles

Customer Service
Home
Products
Cart
Profile